Amusement equipment maintenance

Equipment maintenance steps
A: plastic parts and glass fiber, usable soap water, disinfection detergent, bleach dilution after soaking, brush with a soft cloth or soft scrub,
Reoccupy clear water is rinsed clean, dry or dry with a clean cloth.In the end, 84 disinfectant spray disinfection.
Part 2: software sponge can use soft cloth with soap water scrub, or placed in sunlight disinfection.
Three: wet resistance, good thermal endurance, colorfast wooden parts, usable soap bubble after washing to dry, reoccupy 84 disinfectant spray disinfection.
Four: metal parts if asked to rust, usable brush to floating rust, wipe with dry cloth;Colorless sanhe after exposure in the sun, can buy
Since the spray paint about 20 cm distance, sweep and spray again, after being dry spray again, protection.Paint all dry again after cleaning, drying and sterilization.
Part five: electrical circuit when cleaning, first make sure blackouts, water is forbidden, generally scrub with wet cloth, wait for dry after appearing to turn on the juice.
Six: all Amusement equipment, outdoor slide, drill tube parts should not be water after rain, if any, should be in the lowest place play a diameter of 4 mm hole drainage.
Seven: if it is indoor activity room, the floors, walls, etc., daily ultraviolet light disinfection, indoor ventilation to often.Spraying disinfection with hydrogen peroxide solution once a week.
8: of course, at the same time must also want to check the connection part of the disinfection is solid, the metal frequently active connection part of the gas, electrical circuit and has no common parts
All parts are damaged, can not leave spike safe hidden trouble, etc